Madison Roof Pros provides professional fascia & soffit in Madison, AL for residential and commercial properties across Madison and Limestone counties. Wrapping rotten fascia in aluminum is the single most common cover-up we find on Madison, AL houses. It looks finished from the driveway, it costs almost nothing, and it seals wet wood inside a metal jacket where it will keep rotting quietly for years.
Rot at the eave nearly always starts above it. A gutter that overflows at a valley, a missing drip edge that lets water wick back onto the board, or a downspout outlet cut low so it sheets down the fascia. So we find and fix the source first, and we tell you plainly if the fascia is a symptom of something further up the roof.
Repair means cutting back to sound wood and replacing the section, not filling it. We use PVC trim on the runs that stay wet and primed wood where it matters for appearance, fastened to a sound subfascia. If the subfascia or the rafter tails have gone, that is framing work and it goes on the estimate as framing work rather than hiding inside a trim line.
Soffit is not just trim, it is your attic's air intake, and this is where the two trades meet. Solid soffit panels on a house with a continuous ridge vent starve the roof. When we open a soffit for repair we check whether the intake is real, and we swap solid panels for vented ones or cut and screen new openings while the eave is already apart.
Vinyl soffit is fine and we install plenty of it. What we will not do is fit it over failed wood or over insulation that has been packed into the eave, because either one turns a cheap job into a hidden one. Baffles go in first so the channel stays open, then the panel goes up. Doing it in the wrong order turns a five-hundred-dollar repair into a hidden three-thousand-dollar one.
Woodpeckers and squirrels get treated as an entry problem, not a paint problem. On the wooded lots east of Madison toward Gurley and Owens Cross Roads we see the same holes at the same corners every year. We close the entry with metal behind the trim rather than filling the hole with foam and hoping. Foam is a meal to a squirrel and a doorway to a woodpecker.
Our licensed and insured team brings the right materials and equipment to every job — split neoprene plumbing-vent collars, asphalt roof cement troweled over step flashing, kickout flashing at the low corner of a sidewall, painted steel drip edge at eaves and rakes, gutter apron tucked behind the fascia board, spike-and-ferrule gutter nails backed out of chewed fascia — and backs the work with a written workmanship warranty. We serve Madison and nearby communities including Huntsville, Athens, Decatur, Harvest.
What We Handle
Everything our fascia & soffit in Madison covers
One crew, one point of contact, and the full range of fascia & soffit work in Madison, AL. If it is on this list we do it in house rather than handing it to a subcontractor:
- fascia repair madison al
- soffit repair madison alabama
- rotted fascia board replacement
- aluminum fascia wrap
- vented soffit install
- pvc trim fascia
- soffit vent replacement madison
- subfascia repair
- eave repair madison county
- woodpecker soffit damage
- fascia gutter board
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Madison services.
Materials, equipment and how we do fascia & soffit
The difference between fascia & soffit that lasts and fascia & soffit that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with split neoprene plumbing-vent collars, asphalt roof cement troweled over step flashing, kickout flashing at the low corner of a sidewall, painted steel drip edge at eaves and rakes, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Madison job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Madison and Limestone counties means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do fascia & soffit outside Madison
Madison Roof Pros covers Madison and the surrounding communities of Madison and Limestone counties. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Fascia & Soffit in Huntsville, AL — Madison County, population 215,006
- Fascia & Soffit in Athens, AL — Limestone County, population 25,406
- Fascia & Soffit in Decatur, AL — Morgan County, population 57,938
- Fascia & Soffit in Harvest, AL — Madison County, population 5,893
- Fascia & Soffit in Meridianville, AL — Madison County, population 8,209
- Fascia & Soffit in Moores Mill, AL — Madison County, population 6,729
Start on the Madison Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Madison Chooses Madison Roof Pros
- ✓Alabama licenses roofing at $2,500 and everything else residential at $10,000, so we tell you which side of that line your job falls on and exactly what it means for you.
- ✓Most of what we find on a Madison roof is somebody's old sub-$2,500 fix, and undoing cement over step flashing or a patched vent collar is usually the real work.
- ✓We check your completion date against Alabama's seven-year statute of repose first, because after that runs out nobody but you is on the hook for the building.
- ✓Coating a steep-slope asphalt roof is a refusal here rather than a line item, because the shingle is not a substrate and the sale exists mainly because it stays cheap.
The standards behind fascia & soffit
Quality here is not a matter of opinion — it is written down. The fascia & soffit work we do in Madison follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every fascia & soffit project in Madison gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free fascia & soffit free estimate in Madison, or request a quote and we'll get right back to you.