Madison Roof Pros provides professional metal roofing in Madison, AL for residential and commercial properties across Madison and Limestone counties. We install metal roofing and we talk most Madison homeowners out of it. Not because it is a bad product, but because the payback argument people are given for a suburban house here does not survive contact with the actual numbers.
Standing seam on a complex hip-and-valley roof of the kind Madison built through the 2000s runs two to three times an asphalt reroof. The panels will outlast you. The problem is that everything else on the roof will not, and every penetration through a metal roof is a detail that has to be flashed correctly by somebody who works with metal often enough to be good at it.
If your roof is simple, has long rakes, few penetrations and you intend to stay decades, standing seam is a genuinely excellent answer and we will lay it. Twenty-four-gauge panels, concealed clips that let the panel move with temperature, factory-formed hips and ridges, and butyl at the laps rather than exposed sealant that has to be maintained. Panels get ordered to length so there are no end laps on the slope.
Where metal is nearly always right in Madison, AL is the small stuff. Porch roofs, additions, bay window caps, detached shops and pole barns. Those are low-slope or simple-slope areas where asphalt struggles anyway, and an exposed-fastener panel run in one length costs little and stops a recurring leak permanently. One length of panel, no end laps, and nothing left to reseal in five years.
Metal over existing shingles is a sale we decline. It is offered constantly because it is fast and it keeps the price down by skipping tear-off, but you lose all sight of the deck, the old shingles abrade the underside of the panel, and the assembly is not what the panel manufacturer tested. If the shingles are worn enough to justify metal, they are worth removing.
Screws are the maintenance item nobody mentions when they quote you. An exposed-fastener panel holds down with neoprene-washered screws that back out and harden with heat cycling, and they want checking every several years. On a shop that is fine. On a two-story house in Madison County it is a ladder job forever, which is one more reason we steer houses toward standing seam or toward staying with asphalt.
Our licensed and insured team brings the right materials and equipment to every job — split neoprene plumbing-vent collars, asphalt roof cement troweled over step flashing, kickout flashing at the low corner of a sidewall, painted steel drip edge at eaves and rakes, gutter apron tucked behind the fascia board, spike-and-ferrule gutter nails backed out of chewed fascia — and backs the work with a written workmanship warranty. We serve Madison and nearby communities including Huntsville, Athens, Decatur, Harvest.
What We Handle
Everything our metal roofing in Madison covers
One crew, one point of contact, and the full range of metal roofing work in Madison, AL. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing madison al
- standing seam metal roof
- exposed fastener metal roof
- metal roof cost alabama
- porch metal roofing
- barn metal roof madison
- metal roof over shingles
- 24 gauge standing seam
- metal roof repair madison al
- screw down metal panels
- metal roofing madison county
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Madison services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with split neoprene plumbing-vent collars, asphalt roof cement troweled over step flashing, kickout flashing at the low corner of a sidewall, painted steel drip edge at eaves and rakes, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Madison job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Madison and Limestone counties means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside Madison
Madison Roof Pros covers Madison and the surrounding communities of Madison and Limestone counties. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in Huntsville, AL — Madison County, population 215,006
- Metal Roofing in Athens, AL — Limestone County, population 25,406
- Metal Roofing in Decatur, AL — Morgan County, population 57,938
- Metal Roofing in Harvest, AL — Madison County, population 5,893
- Metal Roofing in Meridianville, AL — Madison County, population 8,209
- Metal Roofing in Moores Mill, AL — Madison County, population 6,729
Start on the Madison Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Madison Chooses Madison Roof Pros
- ✓Alabama licenses roofing at $2,500 and everything else residential at $10,000, so we tell you which side of that line your job falls on and exactly what it means for you.
- ✓Most of what we find on a Madison roof is somebody's old sub-$2,500 fix, and undoing cement over step flashing or a patched vent collar is usually the real work.
- ✓We check your completion date against Alabama's seven-year statute of repose first, because after that runs out nobody but you is on the hook for the building.
- ✓Coating a steep-slope asphalt roof is a refusal here rather than a line item, because the shingle is not a substrate and the sale exists mainly because it stays cheap.
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Madison follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in Madison gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Madison, or request a quote and we'll get right back to you.